EE0-425 Packeteer PacketShaper 6 Practice Exams

Demo Question 2.

You have the outside interface of your Packet Shaper connected to a switch. The switch is in front of two Internet routers. You set up the site router to match the virtual IP address of the routers. The Packet Shaper is not discovering applications properly. What should you do to correct this problem?

A. youneed to set the site router to None to prevent this. The Packet Shaper will resolve the virtual-IP address to one of the routers MAC address.
B. You must set up the site router to match the routers physical ip-address. The Packet Shaper will resolve the physical IP address to the routers MAC address.
C. You need to set the site router to 0.0.0.0, to support a virtual I address. The Packetshaper dynamically resolve the virtual-IP address it one of the router's MAC addresses.
D. You cannot add the virtual IP-address as a site router. The Packet Shaper will give you a warring message when you add the virtual IP-address that discovery will be disabled.


Display Answer

Answer: A

Explanation: